Calculator: the BR18 LCA limit for your building

Calculator · Updated 18 November 2026 · Written by DiFacto

Short answer

For building permits applied for from 1 July 2025, the BR18 limit for the building is 4.0 to 8.0 kg CO2e per m² per year, by building type. The construction process (A4–A5) has its own limit of 1.5. Lower indicative figures have been announced for mid-2027 and mid-2029, but they are not finally decided. The calculator shows the figures for your building type and floor area.

The BR18 LCA limit for your building

The figures in the fields are an example. Enter your own; the calculation runs in your browser, and nothing is stored or sent.

m²
kg CO2e/m²/yr

Limit from 1 July 2025

The building
6.7 kg CO2e per m² per year
1,005 kg CO2e per year in total
You are 0.3 below
Construction process (A4–A5)
1.5 kg CO2e per m² per year
225 kg CO2e per year in total

Indicative, mid-2027

The building
6.0 kg CO2e per m² per year
900 kg CO2e per year in total
You are 0.4 above
Construction process (A4–A5)
1.3 kg CO2e per m² per year
195 kg CO2e per year in total

Indicative, mid-2029

The building
5.4 kg CO2e per m² per year
810 kg CO2e per year in total
You are 1.0 above
Construction process (A4–A5)
1.1 kg CO2e per m² per year
165 kg CO2e per year in total

The calculator shows the requirement, not your LCA. What the building emits takes an LCA of what was built. The figures for 2027 and 2029 are indicative and not finally decided.

Source: BR18 § 298 and the supplementary agreement of 30 May 2024, table 2, read 17 November 2026.

The calculator shows the requirement for your building under the Danish building regulations (BR18): the limit from 1 July 2025, the indicative figures for mid-2027 and mid-2029, and the separate limit for the construction process. Choose the building type and enter the floor area. If you have a calculated value for the building, enter it and see how far you are from each figure.

The calculator shows the requirement, not your LCA. What the building emits takes an LCA of what was built. How to do one from the invoices: as-built LCA from purchase invoices. A worked example is in the as-built LCA example.

How the calculator works

  1. The limit per m² is the figure for the building type in the table below, in kg CO2e per m² per year.
  2. Total per year = the limit per m² × the floor area. It is the limit for the whole building in kg CO2e per year, over the 50 years BR18 uses.
  3. The construction process (transport and work on the site, modules A4–A5) has its own limit, the same for all building types.
  4. Your value is rounded to one decimal before it is compared with the limit, as BR18 does (section 298(6)).

The figures

The figures are in kg CO2e per m² per year. The limit applies to building permits applied for from 1 July 2025. The figures for 2027 and 2029 are indicative figures from the Danish Authority of Social Services and Housing and are not finally decided.

Building typeLimit from 1 July 2025Indicative, mid-2027Indicative, mid-2029
Holiday homes under 150 m² heated floor area4.03.63.2
Holiday homes of at least 150 m² heated floor area6.76.05.4
Detached, terraced, linked and semi-detached houses and farmhouses6.76.05.4
Blocks of flats, offices, retail and warehouses7.56.86.1
Other buildings, for example schools, nurseries and car parks8.07.26.4
Construction process (A4–A5), all building types1.51.31.1

The same table, with what the limits cover and who must comply, is in BR18 LCA requirements.

The example in the calculator

The figures in the example are made up. A building in the category «detached, terraced, linked and semi-detached houses and farmhouses» of 150 m² with a calculated value for the building of 6.4 kg CO2e per m² per year:

Building per m²Building, total per yearConstruction process, total per yearYour value
Limit from 1 July 20256.71,005 kg CO2e225 kg CO2e0.3 below
Indicative, mid-20276.0900 kg CO2e195 kg CO2e0.4 above
Indicative, mid-20295.4810 kg CO2e165 kg CO2e1.0 above

What the figure does not tell you

  • Which limit applies to you. The date of the application for a building permit decides it. The indicative figures have no fixed date.
  • Whether the building is covered. The requirement applies to new buildings and extensions. Renovation without an extension is not covered.
  • What your building emits. Only an LCA shows that. What each module covers is in the LCA modules A1–A5.

Sources

The limits from 1 July 2025 are in BR18 section 298 on bygningsreglementet.dk. The indicative figures for 2027 and 2029 are in table 2 of the supplementary agreement of 30 May 2024 on sbst.dk. Both were read 17 November 2026. If the source says something else when you read it, the source applies.

Frequently asked questions

What is the LCA requirement in 2027?

No new limits have been decided for 2027. The Danish Authority of Social Services and Housing has announced indicative figures for mid-2027: for example 6.8 kg CO2e per m² per year for blocks of flats and offices, 6.0 for detached houses and 1.3 for the construction process. Today, the limits from 1 July 2025 apply.

What is the limit value for a detached house?

For detached, terraced, linked and semi-detached houses and farmhouses, the limit is 6.7 kg CO2e per m² per year for building permits applied for from 1 July 2025. The construction process has its own limit of 1.5. The indicative figures for mid-2027 and mid-2029 are 6.0 and 5.4.

Does the requirement apply to extensions?

Yes. The requirement applies to new buildings and extensions. An extension is calculated on its own and must meet the limit for its own use. Renovation without an extension is not covered.

What is the difference between a limit value and an indicative figure?

The limit value is the requirement that applies today. An indicative figure is a value the Danish Authority of Social Services and Housing has announced as the direction for a future requirement. It is not finally decided and may still be adjusted.

Sources

Brug beregneren på dansk